TIPS FOR KITCHEN APPLIANCE INSTALLATION
Most people attempt to install their kitchen appliance themselves. This is because hiring someone to install it can sometimes be quite expensive. Installing appliances will eat up much of your time and effort. Make sure you are comfortable doing it before you start. Take time to familiarize yourself with the process before doing anything. Here are some tips to help you out.
There should be enough space. – Make the necessary measurements before you buy and install an appliance. There are homeowners who buy appliances on impulse. Only to find out that it does not fit their designated spot. This will only cause frustration and regret. Measure kitchen entryways to ensure the appliance can fit. Smaller appliances will need you to close some of the space around the appliance. Knowing how to hook up and test the water, as well as gas connections, will prevent a disaster in your home.
Check for door swing clearance. – The appliance should fit the chosen location. And you have to be able to open or operate them as well. Refrigerators often need about a 135-degree angle. Do not put the refrigerator against the wall. If you do, make sure to reverse the door swing. This will at least lessen the impact.
Check the wattage. – Checking the wattage rating on the new appliance will avoid overloading the circuit. It is better to buy newer models of appliances. They use less power because they are more energy-efficient. Most basic kitchen appliances will not need a new circuit. If your service can handle the extra wattage and you need to add a new one then you can add a subpanel for more circuits.
Shut off water or gas valve. – Make sure you turn off any water or gas valves that lead to the appliance before installation. Turn them back on once done installing. It is very important to hook up and test your gas appliances in a proper manner. Conduct a bubble test after connecting the gas dryer or oven. This is easy to do. You have to apply dish soap to the connections and joints. There is a leak if it bubbles around those areas.
Gather the necessary accessories. – Check the inclusions of the new appliance. Take note of what you still have to buy. Check to see if you need three-pronged or four-pronged plugs and pipes. Or mayhap vents or drainage paraphernalia. You can buy new connections for other old appliances, too.
Ensure that the appliances are level. – All the appliances should be level. An anti-tip device is often installed on the oven. This will prevent it to tip over and injure someone. A washing machine can leak if it is not level.
Adding a new appliance is not only plugging the unit into the wall. Keep in touch with a professional for your Appliance installation Washington DC. This will ensure that the setup works well.